OCFA Chainsaw Familiarization Practice Test

These questions are part of the practice quiz. Start practicing

• Why is a safe working posture important when operating a chainsaw?
• Why is cooldown important after heavy cutting?
• What is the displacement of the STIHL 460/461 chainsaw?
• After a stall and obstruction is cleared, what is the recommended action before continuing?
• Which statement is a correct pairing with respect to octane statements in the material?
• Which statement best describes the monthly relationship between the daily and weekly inspections?
• What is included in Checking the Clutch Assembly?
• What is the purpose and location of the chain catcher?
• What is the safe practice for refueling a chainsaw?
• Which statement about fuel and bar oil usage in the saws is correct?
• For Crews and Equipment chainsaws, what is the minimum octane recommended?
• Which item is part of the Daily Saw Inspections?
• Which rotation is recommended for the guide bar during maintenance?
• Which drive-link count corresponds to a 24-inch chain in the Common Chain setup?
• In the Ematic Bar Lubrication System, how is oil delivered to the drive links?
• Which item is listed as a Saw Part (2) in the materials?
• Which practice is recommended when operating a chainsaw?
• If you notice decreased air flow to the engine, what maintenance step should you perform?
• How many drive links are specified for a 20-inch chain in the Common Chain configuration?
• Pull-In occurs when?
• Which statement best describes the relationship between fuel and bar oil usage?
• Which item is listed as a Saw Part (1) in the materials?
• What should you do if you experience hearing fatigue in the field?
• How can you identify a low-kickback chain?
• How does improper chain tension affect chainsaw performance?
• Which statement accurately describes the octane requirement?
• Which statement best characterizes the Quickstop Chain Brake’s activation?
• What is the primary purpose of the chain brake on a chainsaw?
• During guide bar maintenance, how should burrs on the edges be filed?
• What is included in Daily Saw Inspections as a readiness check for controls?
• Which action is NOT part of Checking the Air Filter?
• What is the gauge of the Common Chain listed for wildland use?
• What is the pitch of the Common Chain used in wildland applications?
• How can kickback be prevented?
• In planning a safe cut direction, which factors should you consider besides the tree lean?
• How should you handle fuel and solvents during field operations?
• During refueling, what should you do with any spills?
• Which steps help prevent chain binding when bucking?
• If you observe damaged PPE, what is the proper action before operating again?
• Which option confirms the daily inspection includes readiness of controls?
• According to Crews and Equipment, how often should the chainsaw fuel be swapped out?
• Which statement best describes hearing protection during chainsaw use?
• What is the primary purpose of weekly inspections?
• Which feature helps reduce operator fatigue if you experience persistent vibration?
• When using different chains, which saw component is listed as needing to match to operate correctly?
• Which item is included in Weekly Saw Inspections?
• What is the minimum octane rating recommended for fuel in the chainsaw?
• Which company is cited for the octane recommendation?
• Which statement describes a benefit of the Ematic Bar Lubrication System?
• During active chainsaw cutting, where should spectators be kept to maintain safety?
• What is the other action listed under Checking the Clutch Assembly?
• What is the safe method to transport a chainsaw within a vehicle?
• Which statement best explains why a cooldown period is recommended after heavy cutting?
• Describe the safe method to remove a jammed chain.
• What is the minimum PPE required for check out?
• Which item is NOT part of Weekly Saw Inspections?
• Which condition triggers replacement of the chain due to wear?
• Which component directly directs lubrication to drive links in the Ematic Bar Lubrication System?
• How should you respond to a dull or damaged chain?
• Which action is an approved method to clean the air filter?
• When do you operate the chain without oil?
• What feature is described as part of the OSTIHL OILOMATIC system?
• What is a depth gauge and why is it important?
• What is the stated weight of the STIHL 034/036?
• What is the recommended fuel mixture ratio for chainsaws in the material?
• What is the purpose of the exhaust muffler and spark arrestor in outdoor chainsaw use?
• How should you carry a chainsaw when moving through a work area?
• Where are the lubrication ramps located for the Ematic Bar Lubrication System?
• What is the proper sequence of actions when a chainsaw stalls under load?
• Which statement best summarizes the two points in the material?
• What is the documented oil reduction capability of the Ematic Bar Lubrication System?
• The Raptor Multi Cut Carbide Tip Chain has what pitch?
• Which weekly task involves checking chain tension and sharpness?
• What length bar does the STIHL 034/036 use according to the material?
• Which statement is consistent with the material regarding octane usage?
• What describes a safe stance during starting?
• Which statement is true based on the material?
• Which statement about the Ematic Bar Lubrication System’s oil usage is true?
• What are the consequences of using a damaged or dull chain?
• Where should fuel be stored when storing the chainsaw?
• Kickback is defined as which of the following?
• Which activation methods exist for the Quickstop Chain Brake?
• Which of the following correctly states the exact minimum octane value?
• How many drive links does the 20-inch Raptor chain have?
• Where on the bar should you perform the cut?
• Which surfaces on a chainsaw are considered hot and should not be touched during operation?
• How should the octane requirement be interpreted?
• Should you always start with the brake engaged when starting the saw?
• What is the break-in time for a new chain?
• After cleaning the bar with a solvent, what is the next step?
• What should you check on the spark plug?
• Which statement best reflects a benefit of the OSTIHL OILOMATIC system?
• The term 'minimum octane' indicates that octane levels can be:
• Which practice helps prevent misfueling and contains spills during field operations?
• How should you store a chainsaw when not in use?
• Why is it important to maintain the engine idle speed within the manufacturer’s specification?
• How can you confirm the lubrication system is functioning?
• Which device is described as capable of stopping the chain in fractions of a second?
• What is the maximum engine speed listed for the STIHL 034/036?
• What is the maximum rpm listed for the STIHL 460/461 chainsaw?
• Which component is a drive component of the saw?
• What is the safe practice when cutting above shoulder height?
• Which of the following actions is designed to prevent chain binding when bucking?
• What is a recommended action to take when visibility is compromised by dust or smoke during operation?
• Which of the following is a weekly inspection item?
• Which safety step should be part of a safe starting procedure?
• Which safety consideration helps prevent pinching and kickback?
• Under what circumstances should you operate a saw with one hand?
• What is notching in bucking or felling, and when is it used?
• What octane rating does Stihl recommend as a minimum for our chainsaws?
• What is the minimum number of Wildland Chainsaws carried on WUI and Type III Engines as stated?
• Where are the lubrication ramps that direct oil to the drive links located?
• According to our SOP, how often should the chainsaw fuel be swapped out?
• What bar length is paired with the STIHL 460/461 in the given specification?
• Which action helps prevent pushback?
• When should the daily chainsaw inspection be performed?
• Which action is appropriate after a saw repair or servicing?
• When mounting a chain and guide bar, what personal protective equipment should you wear?
• Which item is listed as a Saw Part (3) in the materials?
• Which item is NOT typically included in a daily maintenance checklist for a chainsaw?
• Why is keeping maintenance records important?
• Which items are typically included in a daily chainsaw maintenance checklist?
• Which timing option describes maintenance/checkouts after repair or servicing?
• When should the guide bar be replaced?
• Why do we conduct chainsaw care and maintenance?
• Which part of the saw constitutes the kickback zone?
• Which feature is explicitly associated with the 24-inch Common Chain configuration?
• What is a recommended method for cleaning the air filter?
• When carrying a chainsaw through a work area, in which position should the bar be pointed?
• What should you do if the saw leans unexpectedly during a cut?
• Which statement best describes proper chain tension verification after mounting?
• What is the weight listed for the STIHL 460/461 chainsaw?
• Which air filter type is specified in the system?
• Which statement describes how oil is picked up in the Ematic Bar Lubrication System?
• What should you avoid doing with the roller when using compressed air?
• When are Weekly Saw Inspections conducted?
• What is the function of the chain tensioning screw?
• What is the purpose of the chain catcher?
• If the gasoline octane is 95, does it meet the minimum octane requirement?
• Keeping the work area around a chainsaw clean helps prevent which hazards?
• How often should you perform a daily chainsaw inspection?
• For the STIHL 034/036 wildland saw, what is its displacement?
• What is the function of the anti-vibration system on a chainsaw?
• Which item is a daily inspection element related to fuel?
• What is kickback and where does it typically occur?
• Which action is performed when Checking the Air Filter according to the procedure?
• What is the recommended hand positioning when operating a chainsaw?
• To determine the proper fuel-to-oil ratio for your chainsaw, you should reference:
• Which practice best reduces the risk of injury when operating a chainsaw?
• Kickback may occur under which scenario?
• How many Structural Chainsaws are reported to be on all Trucks?
• Which set of PPE is required for chainsaw operation?
• What is the purpose of the bar oil reservoir or port?
• Which action is included in Checking the Guide Bar?
• What should you do if you observe damaged PPE?
• How should you clean between the rails on the guide bar?
• Why should you avoid cutting with the tip of the bar unless specified?
• What safety practice reduces the chance of accidental chain movement when you pause work?
• What is the purpose of a spark arrestor in a chainsaw?
• Which practice best reduces the risk of kickback?
• Explain the difference between limbing and bucking.
• What is an additional check when examining the guide bar?
• Which action is appropriate for cleaning the cylinder head fins?
• If the bar shows cracks or damage, what is the recommended action?
• Which symptom may indicate improper chain tension during operation?
• Which operation describes limbing?
• What is cited as the first consideration when operating a chain saw?
• Blue spots on the guide bar indicate which issue?
• What is the proper chain tension for cold operation?
• Which of the following indicates the air filter needs service?
• Which of the following is a feature of the STIHL Quickstop Chain Brake?
• If octane 88 is used, what does the material imply?
• On WUI and Type III Engines, how many Wildland Chainsaws are carried?
• Which statement correctly describes a feature of the Ematic Bar Lubrication System?
• Which statement best expresses the octane requirement?
• What is the purpose of a bar cover when storing a chainsaw?
• Which of the following is a listed drive-link count for the 24-inch Common Chain?
• Pushback occurs under what condition?
• Notching in bucking or felling is used to control the direction of the fall. Which statement best describes where the notch is placed?
• Before using a power saw, you should know which of the following?
• Which method helps avoid pull-in?
• The Quickstop Chain Brake can be activated by inertia under what condition?
• What is the primary function of the chain catcher?
• Before starting operation, which bar checks are essential?
• What is the recommended practice for chainsaw use in smoky or dusty environments?
• Describe a safe starting procedure for a chainsaw in the field.
• What is the correct direction to work when maintaining the guide bar?
• What type of engine does the STIHL 460/461 chainsaw use?
• What should you do during cylinder head fins inspection to prevent debris from entering the cylinder head?
• What is the purpose of the STIHL Quickstop Chain Brake?
• What is the method to judge a safe cut direction?
• What is the recommended entering angle for starting a cut?